Server Products makes every effort to publish accurate information on the website. "Google Translate" is provided as a free tool for visitors to read content in one's native language. Translations are not guaranteed to be 100% accurate. Neither Server Products nor its employees assume liability for erroneous translations of website content.
Return to Listing
Express pumps serve from a 1 1/2 gallon pouch with 16 mm fitment to form a sealed, sanitary system of two to six condiments and dressings in a single countertop or drop-in station. The durable, plastic pump has only a few parts, is quick to breakdown and dishwasher safe. Plus, 95% evacuation means more servings to patrons instead of waste.
The Express pump has a special connector that pierces the pouch fitment creating a sealed system for maximum evacuation and savings. The full portion of 1 oz can be reduced in ¼ oz increments, simply by adjusting the portion pin position on the lid lever.
3 Smart Reasons to Choose Pouched Condiment Dispensers from Server: More Servings, More peace of mind & More responsible.
Manual for Express Pump | Model 07794 | Includes: Assembly, Disassembly, Cleaning, Parts Listing, Troubleshooting Guide
Manual for Slim Express | Model SLE-2, SLE-3 & SLE-6 p/n 07520, 07530, 07540 | Includes: Portion Control, Assembly, Disassembly, Pump Cleaning, Cleaning, Parts Listing, Troubleshooting Guide
Parts breakdown diagram for Express Pump | p/n 07794
Parts breakdown diagram for Slim Express Twin | Model SLE-2 p/n 07520
Parts breakdown diagram for Slim Express Triple | Model SLE-3 p/n 07530
Parts breakdown diagram for Slim Sextuple Express Dispenser | Model SLE-6 p/n 07540
Parts breakdown diagram for Slim Express Sextuple Drop-In | Model SLE-6DI p/n 07550
A snapshot list of food manufacturers using Server Products' Pouched Dispensing equipment.
How to use a Server Express pouched product pump. View step-by-step instructions for Assembly, Pouch Connection, Loading, and Cleaning.
Why is the dome popping off the pump housing?
To avoid this headache in the future, it's good to know this is typically a simple fix. A little process fine tuning and we can put this behind us.
Checking for proper dome installation is done by observing the edges where it meets the pump housing. If all the lines around the dome edges are within the pump housing, it was installed correctly. Many times operators think the dome is installed completely because it seems "snug", yet a few of the dome edge lines are still visible from the side.
Lastly, it's possible some residual product may be causing pressure build up and a good cleaning will solve the problem; dissassemble fully, thoroughly clean and air dry before setup again.
Why does my Express pump dispense a little or no product?
When this happens, the first place to look is under the lid to see if the product pouch is empty. With the lid in hand, you're able to confirm if the roller is installed onto the lever. If those two things looks good, deeper investigation is necessary.
Gently remove the pump and attached pouch from the vessel. Check to make sure the pump dome is installed completely - that means all the lines around the dome edges are within the pump housing. If all your moving parts look good, it's time to check the connection of the pump to the pouch.
Is the pouch fully pierced? A good way to be sure is to push the pump connecter piece further into the pouch fitment. If you hear a snap or click, it's in place now and you should be back in business.
Why doesn't this lid fit properly? Is it bent or misshapen? What happened to it?
First check to see if the dome is installed properly (see Dome Pops Off). If it's not the dome, the culprit tends to be the condiment bag within; it typically occurs with a new/full bag. An air gap may be preventing it from siting fully within the base with adequate room for the roller to make a proper connection with the pump dome.
Here's what I've done... Taking care not to separate the pouch from the pump, smooth out or reseat how the pouch rests in the bottom of the vessel and try installing the lid again.
* Server Products equipment is sold through dealers or distributors. The list prices shown throughout the site are for estimating cost. The final cost may be lower or higher based on your location, taking into account taxes, landing fees, etc.
3601 Pleasant Hill Rd
Richfield, WI 53076
© 2019 Server Products, All rights reserved