NEW Touchless Express Stations  | View Full Details

Server Products Commerical Food Service Equipment

Express™ Drop-In Station | (5) Pumps

Model:SE-5 DIP/N:07123List:$0.00 USD
  • Drop-In Condiment Station | (5) Pumps
  • Includes (6) Pumps | 07398

The Server Express™ Quintuple Drop-In Station dispenses (5) condiments from 1 1/2-gallon pouches with 16-mm fitments. Its stainless steel shroud and lid feature rounded corners for a sleek, low-profile presentation in your countertop cutout. Surgical-quality plastic pumps quickly break down, are dishwasher safe, and achieve up to 98% evacuation. This Arby's approved, custom set-up also includes two extra pumps, pouch supports, and replacement parts to keep your operation running.

Fast Facts
  • Stainless steel lid and shroud with flange for drop-in use
  • Works with 1 1/2-gallon pouches with 16-mm fitment
  • 6-piece pumps disassemble quickly and are dishwasher safe
  • 1-oz maximum portion adjusts in 1/4-oz increments
  • Includes (2) extra pumps 07398, pouch supports 07159, and replacement parts:
    • (2) piercing connectors 07381
    • (2) discharge fittings 07796
    • (5) hinge pins 07161
  • Capacity: (5) 1 1/2-gal pouches with 16-mm fitment
  • Portion: 1-oz max; adjustable in 1/4-oz increments
  • Dimensions Overall: 10 7/16"H x 28 1/16"W x 13 3/4"D
  • Cutout Size: 27 3/16"W x 8 1/2"D
  • Weight: 34 lb
  • Certifications: NSF Listed, ADA Compliant (requires less than 5 lbs of pressure to dispense)
  • Warranty: 2-Year

This approved equipment solution is proprietary. For pricing and availability, check with your authorized dealer(s).

Go back to:  Inspire Brands Equipment Solutions > Arby's

  • Documentation
  • Videos
  • Trouble Shooting

Specification Sheet


Parts Breakdown

Resource Documents

  • Pouched Product Matrix
    Pouched Product Matrix

    A snapshot list of food manufacturers using Server Products' Pouched Dispensing equipment.


Why is the dome popping off the pump housing?


To avoid this headache in the future, it's good to know this is typically a simple fix. A little process fine tuning and we can put this behind us.

Checking for proper dome installation is done by observing the edges where it meets the pump housing. If all the lines around the dome edges are within the pump housing, it was installed correctly. Many times operators think the dome is installed completely because it seems "snug", yet a few of the dome edge lines are still visible from the side.

Lastly, it's possible some residual product may be causing pressure build up and a good cleaning will solve the problem; disassemble fully, thoroughly clean and air dry before setup again.


Why does my Express pump dispense a little or no product?


When this happens, the first place to look is under the lid to see if the product pouch is empty. With the lid in hand, you're able to confirm if the roller is installed onto the lever. If those two things looks good, deeper investigation is necessary.

Gently remove the pump and attached pouch from the vessel. Check to make sure the pump dome is installed completely - that means all the lines around the dome edges are within the pump housing. If all your moving parts look good, it's time to check the connection of the pump to the pouch.

Is the pouch fully pierced? A good way to be sure is to push the pump connecter piece further into the pouch fitment. If you hear a snap or click, it's in place now and you should be back in business.


Why doesn't this lid fit properly? Is it bent or misshapen? What happened to it?


First check to see if the dome is installed properly (see Dome Pops Off). If it's not the dome, the culprit tends to be the condiment bag within; it typically occurs with a new/full bag. An air gap may be preventing it from siting fully within the base with adequate room for the roller to make a proper connection with the pump dome.

Here's what I've done... Taking care not to separate the pouch from the pump, smooth out or reseat how the pouch rests in the bottom of the vessel and try installing the lid again.

Recent and Recommendations

Recommended Items

    * Server Products equipment is sold through dealers or distributors. The list prices shown throughout the site are for estimating cost.
    The final cost may be lower or higher based on your location, taking into account taxes, landing fees, etc.